The TSM Flush Series Electric Fuse Box is suitable for mounting the circuit breakers and electric installation devices to distribute power via wiring. mainly used in the circuit of AC 50/60Hz, rated voltage 110v/220V/380V, and acted to install the modular combination equipment.widely used in low voltage distribution networks for power supplying of consumers and commercial buildings.

• Elegant mode unique and good-looking
• Easy to install adjustable structure,flexible and spacious layout of the wiring in line with modern building design requirement;
• The metal din rail which fix the circuit breaker can be moved up and down,easy for installing the circuit breaker;
• Have a bottom for opening the plastic cover easier,unique design;
• Rated voltage/rated frequency:690V/50Hz or 60Hz;
• Material: Cover – PC; Body – ABS; Colour:White;
• This distribution boxes/ boards enclosure confirm to standard BS EN60439-3, JB/T7121-93.
• CE Certified;
• Din rail connection according to EN50022;
• Supplied with removable earth/neutral bar;
• This distribution box has 2way,4way, 6way, 8way, 12way, 15way, 18way, 24way up to 36way.

TSM series applies to terminal of AC 50/60 Hz, rated operating voltage up to 400 V and rated current up to 63A, equipped with various modular electric for function of electric energy distribution, control, (short circuit, overload, earth leakage, over-voltage) protection, signal, measurement of terminal electric appliance.

• Easy to see,Equipped with transparent door;
• Easy to open,can easily open the cover ,door open upward 90 degrees;
• Rated current: 4 ways 50A, 6-36 ways 63A;
• Plastic Distribution Board Material: insulating ABS or self-extinguishing fire material high-quality plastic raw materials. (by no means turn copied material, environmental protection and quality assurance, there will never be black spots)
• Protection level: indirect contact proof 2 protection;
• Complete with earth and neutral bars together with neutral link wire;
• Protection degree: IP65;
• Humanize circuitry symbols , printed display of control Electric Circuit Breaker ,clear and elegant;
• The distribution box is able to regulate the height automatically within a certain range the outer wall;
• 7X9 pure brass (copper is by no means, good conductivity);
• earth leakage circuit breaker panel with sufficient distance, performance and more secure;
• Fashionable design, integrated molding, a variety of sizes to choose size, beautiful appearance, simple;
• outside the flush Circuit Breaker Panel Box, surface mount installation ,not limit to the narrow space, make the installation more easy;
• Different ways 2-36ways available;

LGD series Low Voltage Distribution Box applies impact proof engineering plastics and is furnished with a transparent cover.
Thus each circuit running condition can de seen at the first sight. The specially designed cover of screw 4 hole is not only interest, but also makes the distribution box smooth and handwork.
Our ABS distribution boxes are great for indoor/outdoor environment and widely used in automotive, posts and telecommunications, communications, electricity, coal, aerospace, defence, surveillance systems, railway signals, medical equipment, instruments and meters, LED displays, cable TV and other fields.

• adopt ABS material with the characteristics of flame-proof
• impulse proof,Fuse Box is provided with elegant appearance and reasonable structures
• Installation and dismounting are easy
• generalization and seriation, which make the products with excellent interchangeability and so on
• Easy opening
• Easy for installation
• Range:6/8/12/16/24 and 36ways

HT Series CE Standard Home Power Box panel is with plastic panel and iron bottom. Two terminals(ground connection and zero connection) in the box are easy for the user wiring and routing. HT Series CE Standard Small Breaker Box is applicable to the modular terminal circuit with AC of 50/60HZ, rated voltage of 110V/220V/380V.

• The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved,The product is free from corrosion, carries superior insulation.
• The Product has passed waterproof and dustproof carried out under rigid quality standards.(IP 65)
• The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal,Signal , Relay and Sensor , Communication and joint Box etc.
• The guide-rail shoe plate has round hole, so be able to regulate the cover of distribution box to level position.

HA series Electric Breaker Box/distribution boards are mainly used in the circuit of AC 50/60Hz, rated voltage 110V/220V/380V, and acted to install the modular combination equipment. It is widely used in the family, high building, house, station, port, airport, commercial house, hospital, cinema, enterprises and so on occasions. The plastic unit of the NO-LS modular distribution boxes/distribution boards adopts ABS material with the characteristics of flame-proof, impulse proof, excellent insulation property and so on.
This distribution boxes/boards enclosure confirm to standard BS EN60439-3, JB/T7121-93.

• Waterproof Distribution Box weighs approximately 1/4 the weight of an iron box and can be easily installed or moved,The product is free from corrosion, carries superior insulation.
• Material:The Product has passed waterproof and dust proof carried out under rigid quality standards.(IP 65)
• Usage: convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal ,Relay and Sensor, Communication and joint Box etc

LS Surface type series distribution boxes/distribution boards are mainly used in the circuit of AC 50/60Hz, rated voltage 110V/220V/380V, and acted to install the modular combination equipment. It is widely used in the family, high building, house, station, port, airport, commercial house, hospital, cinema, enterprises and so on occasions. The plastic unit of the NO-LS modular distribution boxes/distribution boards adopts ABS material with the characteristics of flame-proof, impulse proof, excellent insulation property and so on.

• With high-quality plastic raw materials ;
• 7X9 pure brass bus;
• The Boxes integration of the molding;
• a variety of sizes to choose size, beautiful appearance;
• Earth leakage circuit breaker panel with sufficient distance, performance and more secure;
• Rated current(Max):125A
• Material:Fire-resistant/ABS

NTSM Series Electrical Distribution Box Has a unique human shape design, as for indoor lighting, socket, use electrical overload, overvoltage, leakage short circuit protection, applicable to all kinds of civil houses, high-rise building hotel building, malls, and a hospital, industrial and mining enterprises and other buildings occasion.

• Three color cover
• Nominal working frequency: 50 hz/60 hz
• Cover panel design is luxury and attractive ,the face overing colors are dark green and brown
• Pure ivory ,high strength ,never change color ,transparent material is PC
• Fixed frame ,simple structure,and easy installation
• This distribution box has 4way, 6way, 8way,  12way,  18way, 24way .

HK Series Domestic Distribution Board is in line with IEC-493-1 standard,attractive and durable, safe and reliable, which is widely used in various places such as factory, mansion, residence, shopping center and so on.

• Panel is the ABS material for the engineering, high strength,never change color, the transparent material is PC.High impact resistance material;
• Face covering of the distribution box adopts the push-type opening and closing mode, the face mask can be opened by pressing lightly;
• the self-locking positioning hinge structure is provided when opening;
• The guide rail support plate can be lifted to the highest movable point, it is no longer limited by the narrow space when installing the wire;
• To install easily, the switch of the distribution box is set up with the wire groove and wire pipe exit-holes, which are easy to use for a variety of wire grooves and wire pipes;

Designed to enclose electrical and or electronic equipment and protect against harsh,industrial environments.
For use as instrument enclosures,electric hydraulic or pneumatic control housings,electrical junction boxes or terminal wiring enclosures.
Impressive styling features make the enclosure a suitable addition to any high-tech equipment installation
For high temperature applications ,a gasket retainer may be required, please refer to factory

Construction
Body and cover are formed from 1.2mm mild steel. mounting plate in sheet steal or galvanized steel.
Continuously hinged cover has steel hinges and provides 120 º opening.

Finish
Standard cycle epoxy polyester powder finish.
Body and doors RAL 7032 textured finish.
Mounting plate in RAL 2004 smooth finish

Protection degree
Complies with IEC 60529 and NEMA4,12
IP65 waterproof class

Stainless steel outdoor protective box is a model based on components specifications Quantities assembly design process various control functions distribution box
Due to the size of the box can be arbitrarily chosen so that the srtucture is quite close to the perfect combination.

Standard configuration:
Enclosure and door
Mounting plate
Handle Lock
Polyurethane door seal
2 parts Cable gland plate
4 eyebolts